Edimax Technology BR-6675nD User Manual
Page 99
98
Note: If you have a pop‐up blocker installed, you
may have to disable it, or set it to allow the pop‐up
window to show up.
Root AP SSID
Input the SSID of the wireless access point with
which you wish to connect.
Site Survey
Click “Select Site Survey” and a pop‐up window will
appear. All reachable wireless access points will be
shown in the window. Select a wireless access point
from the list, and click “Done” to establish a
connection. Clicking “Refresh” will renew the list.
Wireless Module
Select “Enable” to turn on the 5GHz wireless signal
and select “Disable” to turn it off.
Click “Apply” to save the changes, or click “Cancel” to discard the changes. After you
have clicked “Apply”, you will see the following message:
Click “Apply” to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click “Continue” to configure other settings.