Edimax Technology BR-6675nD User Manual
Page 30
29
2‐4‐2 Using “Static IP” as broadband connection type
1. If your ISP is providing you Internet access via a fixed IP address, select “Static IP”.
Generally, your ISP will provide you with such information as IP address, subnet
mask, gateway address, and DNS address.
Item Name
Description
Fixed IP Address
Input the IP address assigned by your ISP here.
Subnet Mask
Input the subnet mask assigned by your ISP here.
DNS Address 1
and 2
Enter the primary and secondary DNS addresses assigned by
your ISP here.
Default Gateway
Input the default gateway assigned by your ISP here. Some
ISPs may call this “Default Route”.
TTL
Enable the “TTL” function if your ISP requires you to do so.
NOTE: You must use the addresses provided by your ISP. Inputting incorrect values
will cause malfunction.
2. Click “OK” to complete setup.
3. When the following message appears, click “Apply” to save the changes and restart
the broadband router. The router will take about 60 seconds to restart.