Edimax Technology BR-6675nD - Manual (Page 53)

52
2. “Connect on Demand” only connects to the Internet when
you initiate Internet connection.
3. “Manual” connects to the Internet only when the
“Connect” button on this page is clicked, and disconnects
when the “Disconnect” button is clicked.
Idle Time Out Specify the amount of time the router waits before shutting
down an idle connection. This option is only available when
“Connect on Demand” is selected.
Enable Dual‐WAN
Access Check the “Enable Dual‐WAN Access” box if your ISP requires
you to do so.
Click “Apply” to save the changes. After you have clicked “Apply”, you will see the
following message:
Click “Apply” to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click “Continue” to configure other settings.