RIDGID FG-100 - Manual (Page 5)

START UP
B. Printer header setup
C. Clock Setup
4
The headers (lines 1-4) for the printout can be set.
Press:
Confirm the “REPORT HEADER” option.
Select the lines (from R1 to R4) for changing, pressing
Confirm the selection.
Enter values ( maximum 16 characters ).
Execute the steps above for other lines in the same way.
Press
to exit to the previous menu. F2
Date and Time can be set.
The instrument should be switched off.
Press:
+
Insert the password “0011” and press
Confirm the “CLOCK” option pressing
Select the Hours or Minutes for changing, pressing
Confirm the selection pressing the key
Select the Day , Month or Year for changing, pressing
Confirm the selection pressing the key
Press to change the Date F1
Press to exit to the previous menu.
Switch the instrument off pressing
F2
Set the Hours or the Minutes value, pressing
Set value, pressing Day , Month or Year
Confirm changes pressing the key
Confirm changes pressing the key
Press:
Press:
A. Country Selection
Press:
Language and local country instrument configuration can be selected.
Available countries are: Italy, UK, France, Holland, Belgium (F),
Belgium (NL), Germany, Spain, Denmark, Sweden
. , other country
Confirm the “NATION” option pressing
Select the county, pressing
Confirm the selection pressing
Press to exit to the previous menu. F2
–
HELP 15:44 20/01/07
NATION:Other
REPORT HEADER
SENSOR DIAGNOSIS
Batt. 100%
SERVICE ESCAPE
–
NATION:
Espana
Danmark
Sverige
Other
ESCAPE
–
HELP 15:44 20/01/07
NATION:Other
REPORT HEADER
SENSOR DIAGNOSIS
Batt. 100%
SERVICE ESCAPE
–
REPORT HEADER
R1 RIDGID FG-100
R2 Analysis Report
R3
R4
ESCAPE
–
REPORT HEADER
R1 RIDGID FG-100
R2 Analysis Report
R3
R4
ESCAPE
–
SET-UP Pag.1
Clock
Serial Port
Analysis par.
P decay Time
NEXT
–
CLOCK
Hour : 10
Minutes : 22
DATE ESCAPE
–
DATE
Day : 10
Month : 1
Year : 2007
Type : EURO
HOUR ESCAPE