Count plus keys, Tool and work area set-up – RIDGID CountPlus User Manual

Page 5

Advertising
background image

Ridge Tool Company



Tools For The Professional

TM

SeeSnake

®

CounTPluS Cable-CounTeR

Tool and Work Area Set-Up

WARNING

Before use, setup the SeeSnake and work area safely to reduce the

risk of injury from shock, fire, crushing injuries or other causes and

prevent damage.

1. Check work area for adequate lighting.

2. Check for a stable, level location to firmly position the SeeSnake where it

will be stable in operation.

3. Do not connect the SeeSnake power cord in the presence of flammable

liquids, vapors, or dust that may ignite.

4. Ensure there is a clear, level, dry place for the operator that allows him to

operate clear of the cable.

5. Ensure a clear path to a power outlet that does not contain any potential

sources of damage to the power cord.

6. Use extension cords only if necessary. Use only cords rated for outside

use and of sufficient wire size.

Minimum Wire Gauge for Extension Cords

Nameplate

Amps

Total Length (in feet)

0 – 25

26 – 50

51 – 100

0 – 6

18 AWG

16 AWG

16 AWG

6 – 10

18 AWG

16 AWG

16 AWG

10 – 12

16 AWG

16 AWG

14 AWG

12 – 16

14 AWG

12 AWG

NOT RECOMMENDED

CountPlus Keys

Figure 1: CountPlus Keypad

Keypad Description

The names of the keys are shown in Figure 1. Their functions are as follows.

Text Key

Toggles Text display on or off.

Menu / Back Key

Opens the Main Menu.

Distance Key

Toggles the distance measure display on or off.

Time Key

Toggles the date-time display to show date, time, none, or

both.

Left and Right Arrows

Move through available slides to

new slide if text is being displayed. Moves through menu choices and text

characters.
Up/Edit Key

Goes directly to the editing page for existing slides, if

slide text is being displayed when pressed. Moves through menu choices or

text characters.

Down Arrow

Moves through menu choices, values and text charac-

ters in edit mode.
Zero/Select Key

Selects a highlighted menu item; initializes the

local zero-point counter. A long press (> 3 seconds) will re-zero the default

distance counter.

Up / Edit Arrow

Text Key

Menu / Back Key

Left Arrow

Distance Key

Down Arrow

Time Key

Zero / Select Key

Right Arrow

744_031-601_0A_RevA_Countplus_ma3 3

9/04/2009 10:27:32

Advertising