RIDGID CountPlus - Manual (Page 6)

Ridge Tool Company 
Tools For The Professional TM
SeeSnake ® CounTPluS Cable-CounTeR
System Settings
By pressing on the Menu Key , you will bring up the Main Menu screen
with three icons on it.
Figure 2: Main Menu
Text Editing – Select this option to go directly to the slide editing
menu from which you can select an existing slide for editing. Detailed instruc-
tions on editing titles and text content of slides can be found on Page 8.
Figure 3: Editing Screen
Information Screen – This option will bring up an information
screen showing the software version installed in the CountPlus, the video
type (NTSC or PAL) it is configured for, and the total distance reading since
the unit was programmed.
Figure 4: Information Screen
Tools Menu – Select this option to set the system date, time, the
reel and cable size and the units of measurement used.
To choose one of the icons press Arrow Keys to high-
light the icon of your choice. Press the Zero / Select Key to activate the
choice.
Figure 5: Tools Menu
System Time
Use the Arrow Keys to scroll to the Tools icon ,
and press the Zero/Select Key . In the sub-menu that appears, highlight
the Clock icon, and press the Zero/Select Key again. This will
bring up a menu showing the time format, hour, minute and second values,
and AM/PM options. Use the Arrow Keys to move to the item you want to
change, and use the up and down keys to set it to your preferred
setting.
744_031-601_0A_RevA_Countplus_ma4 4 9/04/2009 10:27:40