SUUNTO Vyper Air - Manual (Page 23)

5.8.7. Setting the RGBM values
For certain divers and diving conditions, it may be desirable to set the attenuated RGBM
mode. The selection is displayed during the DIVE mode startup. The options are full RGBM
effects (100%), and attenuated RGBM (50%).
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
5.8.8. Setting the units
Use Unit Settings to choose between metric (meters/celsius/bar) and imperial
(feet/fahrenheit/psi) units.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
5.8.9. Setting the tank pressure alarm
The tank pressure alarm can be set "ON" or "OFF" and in the range of 10 - 200 bar. The
alarm is the secondary cylinder pressure alarm point. The alarm is activated when the
tank pressure drops below the set limit. The 50 bar alarm, however, is fixed and cannot
be changed.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
5.8.10. Setting the tank pressure
The wireless transmission can be set “ON” or “OFF” depending whether the optional
wireless pressure transmitter is used or not. No cylinder pressure-related data is shown,
nor data reception made, when this selection is “OFF”.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
5.8.11. Setting the HP code
The HP Code setting allows you to verify the selected code and to erase the stored code.
It also enables re-pairing if necessary.
23