Personal adjustments – SUUNTO Vyper Air User Manual

Page 26

Advertising
background image

NOTE

Section 5.8.4. Setting the personal/altitude adjustments describes
how the Altitude value is set.

WARNING

Traveling to a higher elevation can temporarily cause a change in the
equilibrium of dissolved nitrogen in the body. It is recommended that
you acclimatize to the new altitude by waiting at least three hours
before diving.

5.9.5. Personal adjustments
There are personal factors that can affect your susceptibility to DCI, which you can predict
in advance, and input into the decompression model. Such factors vary between divers
and also for the same diver from one day to another. The three-step Personal Adjustment
setting is available if a more conservative dive plan is desired and, for very experienced
divers, a two step adjustment for RGBM effect on repetitive dives is available
The personal factors which tend to increase the possibility of DCI include, but are not
limited to:

cold exposure - water temperature less than 20 °C/68 °F

below average physical fitness level

fatigue

dehydration

previous history of DCI

stress

obesity

patent foramen ovale (PFO)

exercise on or after dive

This feature is used to adjust the computer to be more conservative, according to personal
preference, by entering the suitable Personal Adjustment setting with the help of Table 5.6,
Personal Adjustment settings
. In ideal conditions, retain the default setting, P0. If conditions
are more difficult, or any of the factors which tend to increase the possibility of DCI exist,
select P1, or even the most conservative P2. The dive computer then adjusts its
mathematical model according to the entered Personal Adjustment setting, giving shorter
no-decompression times (see Section 10.2.2. No-decompression limits, Table 10.1,
No-decompression time limits for various depths (m)
and Table 10.2, No-decompression
time limits for various depths (ft)
).

Table 5.6. Personal Adjustment settings

Desired tables

Condition

Personal
adjustment
value

Default

Ideal conditions

P0

Progressively more conservative

Some risk factors or conditions exist

P1

Several risk factors or conditions
exist

P2

The Suunto Vyper

AIR

also allows experienced divers who are willing to accept a greater

level of risk to adjust the RGBM model. The default setting is 100%, which gives full RGBM
effect. Suunto strongly advises you to use full RGBM effect. Statistically, very experienced
divers have less incidents with DCI. The reason for this is unknown, but it is possible that
some level of physiological and/or psychological accommodation can take place when
you are very experienced as a diver. Thus, for certain divers and diving conditions, it may
be desirable to set attenuated (50%) RGBM mode. See Table 5.7, RGBM model settings.

26

Advertising