MITSUBISHI ELECTRIC MDT701S - Manual (Page 16)

English-12
Flow of preparation
P-1 Preparation for installation
- Determine the installation location
- Ventilation requirements for enclosure mounting Page 13
Carry out as necessary
P-2
P-3
P-5
P-6
P-7
P-8
P-4
P-9
Carry out as necessary
Carry out as necessary
Carry out as necessary
Carry out as necessary
Carry out as necessary
Installing the optional speakers
Installing the expansion module
- Installation of the expansion module
- SDI for long-distance connection or multiple-monitor connection
- Connecting OPS-compliant computer
Connecting RS-232C
- Monitor control via RS-232C
Connecting LAN
- Monitor connection using LAN
Connecting a USB device
- Connecting multiple USB devices using the USB hub function
Installing the monitor
- Using the wall mount or ceiling mount
- Preventing the handles from touching the wall
- Installing in the portrait position
- Attaching the corner protectors
- Using the monitor without the bezel
Pages 14 to 16
Page 17
Page 26
Page 27
Page 28
Pages 18 to 23
Pages 24 to 25
Page 29
Page 30
Connection procedure
- Wiring diagram
- Prevention of disconnection of HDMI cable
- Connecting with a computer (analog connection)
- Connecting with a computer (digital connection)
- Connecting a video device (component video/HDMI device)
- Connecting a video device (composite video/S video device)/stereo amplifi er
Connecting the power cord to the monitor
- Connecting the power source
The monitor is ready for use.
How to Use
Preparation for use