MITSUBISHI ELECTRIC MDT701S - Manual (Page 21)

English-17
English
Left speaker
(option)
Right speaker
(option)
How to install the optional speakers
1. Install the optional speakers on the monitor.
Use the metal fi ttings and screws supplied with the optional speakers.
Please refer to Quick Setup Guide of the optional speakers for the detailed installation procedure.
2. Insert the left speaker cable into the SPEAKER (S)(L) on the monitor, and insert the right speaker cable into the SPEAKER (S)(R).
NOTE:
Match the polarity of the speaker cables and that of the terminals (+ (red)/- (black)).
Unmatched polarity may cause problems with audio output.
P-3 Installing the optional speakers
Carry out as necessary
NOTE:
Switch the built-in speaker mode to the optional speaker mode after you power on the monitor.
See the page for How to Use (on page 30) for further details.
CAUTION:
Don’t hold the speakers when moving the monitor.
The monitor and the speakers may be damaged and you may be injured if the monitor falls.
To speaker terminal (L)
To speaker terminal (R)
SPEAKER (S)(L)
SPEAKER (S)(R)
Black(-)
Red(+)
Black(-)
Red(+)