MITSUBISHI ELECTRIC MDT552S - Manual (Page 16)

English-12
Flow of preparation
P-1 Preparation for installation
- Determine the installation location
- Ventilation requirements for enclosure mounting
- To avoid the monitor from falling Page 13
Carry out as necessary
P-2
P-3
P-5
P-6
P-7
P-8
P-4
P-9
Carry out as necessary
Carry out as necessary
Carry out as necessary
Carry out as necessary
Carry out as necessary
Installing the optional speakers
Installing the expansion module
- Installation of the expansion module
- SDI for long-distance connection or multiple-monitor connection
- Connecting OPS-compliant computer
Connecting RS-232C
- Monitor control via RS-232C
Connecting LAN
- Monitor connection using LAN
Connecting a USB device
- Connecting multiple USB devices using the USB hub function
Installing the monitor
- Installing and removing the stands (The stands are optionally available.)
- Using the wall mount or ceiling mount
- Preventing the handles from touching the wall
- Removing the stand guide frames
- Using the wall mount spacers
- Installing in the portrait or face-up position
- Attaching the corner protectors
- Using the monitor without the bezel Pages 14 to 17
Page 18
Page 27
Page 28
Page 29
Pages 19 to 24
Pages 25 to 26
Page 30
Page 31
Connection procedure
- Wiring diagram
- Prevention of disconnection of HDMI cable
- Connecting with a computer (analog connection)
- Connecting with a computer (digital connection)
- Connecting a video device (component video/HDMI device)
- Connecting a video device (composite video/S video device)/stereo amplifi er
Connecting the power cord to the monitor
- Connecting the power source
The monitor is ready for use.
How to Use
Preparation for use