JVC KD-SC402 - Manual (Page 13)

13
ENGLISH
Indications Item
( : Initial) Selectable settings, [reference page]
DEMO
Display demonstration • DEMO ON
• DEMO OFF
: Display demonstration will be activated automatically if no
operation is done for about 20 seconds, [5].
: Cancels.
CLK DISP * 1
Clock display
• ON
• OFF
: Clock time is shown on the display at all times when the power is
turned off.
: Cancels; pressing DISP will show the clock time for about
5 seconds when the power is turned off, [5].
CLOCK H
Hour adjustment 0 – 23 (1 – 12) [Initial: 0 (0:00)], [5].
CLOCK M
Minute adjustment 00 – 59 [Initial: 00 (0:00)], [5].
24H/12H
Time display mode • 24H
• 12H : See also page 5 for setting.
CLK ADJ * 2
Clock adjustment
• AUTO
• OFF
: The built-in clock is automatically adjusted using the CT (clock
time) data in the RDS signal.
: Cancels.
AF-REG * 2
Alternative frequency/
regionalization
reception
• AF
• AF REG
• OFF
: When the currently received signals become weak, the unit
switches to another station (the programme may differ from the
one currently received), [8, 16].
• The AF indicator lights up.
: When the currently received signals become weak, the unit
switches to another station broadcasting the same programme.
• The AF and REG indicators light up.
: Cancels (not selectable when “DAB AF“ is set to “AF ON“).
You can change PSM (Preferred Setting Mode) items
listed in the table that follows.
1
2
Select a PSM item.
General settings — PSM
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.
Continued on the next page
EN06-13_KD-G431_003A_f.indd 13 EN06-13_KD-G431_003A_f.indd 13 10/16/06 5:27:49 PM 10/16/06 5:27:49 PM