More about this unit, English, Basic operations – JVC KD-SC402 User Manual

Page 21: Tuner operations

Advertising
background image

ENGLISH

21

To keep discs clean

A dirty disc may not play correctly.
If a disc does become dirty, wipe it with
a soft cloth in a straight line from center
to edge.
• Do not use any solvent (for example, conventional

record cleaner, spray, thinner, benzine, etc.) to clean
discs.

To play new discs

New discs may have some rough spots
around the inner and outer edges. If
such a disc is used, this unit may reject
the disc.
To remove these rough spots, rub the edges with a
pencil or ball-point pen, etc.

Warped disc

Sticker

Sticker residue

Stick-on label

Do not use the following discs:

Unusual shape

Single CD (8 cm disc)

More about this unit

Basic operations

Turning on the power

• By pressing SRC on the unit, you can also turn on the

power. If the source is ready, playback also starts.

Turning off the power

• If you turn off the power while listening to a disc, disc

play will start from where playback has been stopped
previously, next time you turn on the power.

Tuner operations

Storing stations in memory

• During SSM search...
– All previously stored stations are erased and

stations are stored newly.

– Received stations are preset in No. 1 (lowest

frequency) to No. 6 (highest frequency).

– When SSM is over, the station stored in No. 1 will

be automatically tuned in.

• When storing a station manually, the previously

preset station is erased when a new station is stored
in the same preset number.

FM RDS operations

• Network-Tracking Reception requires two types of

RDS signals—PI (Programme Identification) and AF
(Alternative Frequency) to work correctly. Without
receiving these data correctly, Network-Tracking
Reception will not operate correctly.

• If a Traffic Announcement is received by TA Standby

Reception, the volume level automatically changes to
the preset level (TA VOL) if the current level is lower
than the preset level.

• When Alternative Frequency Reception is activated

(with AF selected), Network-Tracking Reception is
also activated automatically. On the other hand,
Network-Tracking Reception cannot be deactivated
without deactivating Alternative Frequency
Reception. (See page 13.)

Continued on the next page

EN14-27_KD-G431_003A_f.indd 21

EN14-27_KD-G431_003A_f.indd 21

9/21/06 1:53:35 PM

9/21/06 1:53:35 PM

Advertising