Remote controller, Main elements and features – JVC KD-SC402 User Manual

Page 19

Advertising
background image

ENGLISH

19

Warning:

• Do not install any battery other than CR2025 or its

equivalent; otherwise, it may explode.

• Do not leave the remote controller in a place

(such as dashboards) exposed to direct sunlight
for a long time; otherwise, it may explode.

• Store the battery in a place where children cannot

reach to avoid risk of accident.

• To prevent the battery from over-heating,

cracking, or starting a fire:
– Do not recharge, short, disassemble, heat the

battery, or dispose of it in a fire.

– Do not leave the battery with other metallic

materials.

– Do not poke the battery with tweezers or

similar tools.

– Wrap the battery with tape and insulate when

throwing away or saving it.

Main elements and features

1

(standby/on/attenuator) button

• Turns the power on if pressed briefly or

attenuates the sound when the power is on.

• Turns the power off if pressed and held.

Ÿ

Turn on the connected component and
start playing the source.

!

Adjust the volume.

Adjust the sound as you want. (See

page 12.)

To check the other information while
listening to an external component

AUX IN or EXT IN

Ô

Clock

Remote controller —

RM-RK50

This unit can be remotely controlled as instructed here
(with an optionally purchased remote controller). We
recommend that you use remote controller RM-RK50
with your unit.

Installing the lithium coin battery

(CR2025)

Aim the remote controller directly at the remote
sensor on the unit. Make sure there is no obstacle
in between.

Continued on the next page

EN14-27_KD-G431_003A_f.indd 19

EN14-27_KD-G431_003A_f.indd 19

9/29/06 2:39:01 PM

9/29/06 2:39:01 PM

Advertising