JVC KD-SC402 - Manual (Page 16)

16
ENGLISH
Storing DAB services in memory
You can preset six DAB services (primary) for each band.
1
Select a service you want (see steps ~ to ⁄
on page 15).
2
Select the preset number (1 – 6) you want to
store into.
Tuning in to a preset DAB service
1
2
Select the preset DAB service (primary)
number (1 – 6) you want.
If the selected primary service has some secondary
services, pressing the same button again will tune
in to the secondary services.
Tracing the same programme—
Alternative Frequency Reception
You can keep listening to the same programme by
activating the Alternative Frequency Reception.
• While receiving a DAB service:
When driving in an area where a service cannot be
received, this unit automatically tunes in to another
ensemble or FM RDS station, broadcasting the same
programme.
P4
BAYERN 2
• While receiving an FM RDS station:
When driving in an area where a DAB service is
broadcasting the same programme as the FM RDS
station is broadcasting, this unit automatically tunes
in to the DAB service.
When shipped from the factory, Alternative Frequency
Reception is activated.
To deactivate the Alternative Frequency
Reception, see page 14.
To change the display information while
tuning to an ensemble
Service name
=
Ensemble name
=
Channel number
=
Frequency
=
Clock
= (back to the beginning)
iPod operations
This unit is ready for operating an Apple iPod from the
control panel.
Before operating, connect the Interface adapter for
iPod—KS-PD100 (separately purchased) to the CD
changer jack on the rear of the unit.
• For connection, see Installation/Connection Manual
(separate volume).
• For details, refer also to the manual supplied with the
interface adapter.
Caution:
Make sure to turn off this unit or turn off the
vehicle’s ignition switch before connecting or
disconnecting the iPod.
Preset number flashes for a while.
EN14-27_KD-G431_003C_fff.indd 16 EN14-27_KD-G431_003C_fff.indd 16 3/13/08 11:57:10 AM 3/13/08 11:57:10 AM