JVC KD-R402 - Manual (Page 12)

ENGLISH
12 OPERATIONS & EXTERNAL DEVICES
Listening to the other external components
You can connect an external component to AUX (auxiliary) input jack on the control panel.
Preparation: Make sure “
AUX ON” is selected in the “SRC SELECT” = “ AUX IN” setting, see page 19.
1 Select “AUX IN.”
2
—
Turn on the connected component and start playing the source.
3 Adjust the volume.
4
—
Adjust the sound as you want (see pages 14 and 15).
Connecting an external component to the AUX input jack
3.5 mm stereo mini plug
(not supplied)
Portable audio player, etc.
• You cannot connect a computer to the USB input
terminal of the unit.
• Make sure all important data has been backed up to
avoid losing the data.
• Do not leave a USB device in the car, expose to direct
sunlight, or high temperature to avoid deformation
or cause damages to the device.
• Some USB devices may not work immediately after
you turn on the power.
• For more details about USB operations, see page 22.
Cautions:
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device repeatedly
while “READING” is shown on the display.
• Do not start the car engine if a USB device is
connected.
• This unit may not be able to play the files depending
on the type of USB device.
• Operation and power supply may not work as
intended for some USB devices.
EN10-15_KD-R501_003A_f.indd 12 EN10-15_KD-R501_003A_f.indd 12 9/10/08 11:25:27 AM 9/10/08 11:25:27 AM