Specifications, English 26 – JVC KD-R402 User Manual
Page 26
ENGLISH
26
AUDIO AMPLIFIER SECTION
Maximum Power Output:
Front/Rear:
50 W per channel
Continuous Power Output (RMS):
Front/Rear:
19 W per channel into 4 Ω, 40 Hz to 20 000 Hz
at no more than 0.8% total harmonic
distortion.
Load Impedance:
4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range:
Bass:
±12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz)
Q1.0, Q1.25, Q1.5, Q2.0
Middle:
±12 dB (0.5 kHz, 1.0 kHz, 1.5 kHz, 2.5 kHz)
Q0.75, Q1.0, Q1.25
Treble:
±12 dB (10.0 kHz, 12.5 kHz, 15.0 kHz,
17.5 kHz)
Q = Fixed
Frequency Response:
40 Hz to 20 000 Hz
Signal-to-Noise Ratio:
70 dB
Line-Out Level/Impedance:
2.5 V/20 kΩ load (full scale)
Output Impedance:
1 kΩ
Subwoofer-Out Level/Impedance:
2.5 V/20 kΩ load (full scale)
Other Terminal:
USB input jack, AUX (auxiliary) input jack
TUNER SECTION
Frequency Range:
FM:
87.5 MHz to 108.0 MHz
AM:
MW: 522 kHz to 1 620 kHz
LW: 144 kHz to 279 kHz
FM Tuner
Usable Sensitivity:
11.3 dBf (1.0 μV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 μV/75 Ω)
Alternate Channel Selectivity (400 kHz):
65 dB
Frequency Response:
40 Hz to 15 000 Hz
Stereo Separation:
30 dB
MW Tuner
Sensitivity:
20 μV
Selectivity:
35 dB
LW Tuner
Sensitivity:
50 μV
Specifications
EN22-27_KD-R501_003A_f.indd 26
EN22-27_KD-R501_003A_f.indd 26
9/10/08 11:11:50 AM
9/10/08 11:11:50 AM