Listening to the radio, Improving the fm reception – JVC KD-R402 User Manual
Page 7
ENGLISH
7
OPERATIONS
Listening to the radio
1
Select “FM” or “AM.”
2
Search for a station to listen—Auto Search.
When a station is tuned in, searching stops. To stop searching, press the same
button again.
• You can also search for a station manually—Manual Search. Hold either one of
the buttons until “M” flashes on the display, then press it repeatedly.
• When receiving an FM stereo broadcast with sufficient signal strength, the ST
indicator lights up on the display.
Improving the FM reception
When an FM stereo broadcast is hard to receive,
activate monaural mode for better reception.
• See also page 17.
Reception improves, but stereo effect will be lost.
• The MO indicator lights up on the display.
To restore the stereo effect, repeat the same
procedure to select “
MONO OFF.” The MO indicator
goes off.
Storing stations in memory
Automatic presetting (FM)— SSM (Strong-
station Sequential Memory)
You can preset up to 18 stations for FM.
1
While listening to a station...
2
Select the preset number range you want to
store.
3
Local FM stations with the strongest signals are
searched and stored automatically.
• To stop searching, press
4
/
¢
.
To preset other 6 stations, repeat from step
1 again.
[Turn]
=
[Press]
Continued on the next page
EN02-09_KD-R501_003A_f.indd 7
EN02-09_KD-R501_003A_f.indd 7
9/10/08 11:10:47 AM
9/10/08 11:10:47 AM