JVC KD-R402 - Manual (Page 4)

ENGLISH
4
Basic operations
p Detach the panel.
q Change the display information.
w • FM/AM: Search for station.
• CD/USB: Select track.
e Return to the previous menu.
r Remote sensor
• You can control this unit with an optionally
purchased remote controller. For details, see
page 13.
t AUX (auxiliary) input jack
y USB (Universal Serial Bus) input jack
* 1 Also known as “Control dial” in this manual.
* 2 You cannot select “CD” as the playback source if no
disc is in the unit.
* 3 You cannot select these sources if they were disabled
in the Menu (see “ SRC SELECT” in “Menu
operations” on page 19).
* 4 You can still adjust the volume during pause when
the selected source is CD/USB.
Before resume playback, check to be sure that you
have not raise the volume level too much.
1 • FM/AM: Select preset station.
• CD/USB: Select folder.
2 • Turn on the power.
• Attenuate the sound (if the power is on).
• Turn off the power [Hold].
3 Select the source.
FM = CD * 2 = USB = AUX IN * 3 = AM * 3 =
(back to the beginning)
4 • Enter list operations.
• Enter Menu setting [Hold] .
5 • Control the volume * 4 or select items [Turn].
• Confirm the selection [Press] .
• FM: Enter SSM preset mode [Hold] .
• CD/USB: Enter playback mode [Hold] .
Pause/resume playback * 4 [Press] .
6 Loading slot
7 Display window
8 Eject disc.
9 • Activate/deactivate TA Standby Reception.
• Enter PTY Searching mode [Hold].
KD-R501: You can change the display and button illumination (see “ COLOR” on page 17).
EN02-09_KD-R501_003A_f.indd 4 EN02-09_KD-R501_003A_f.indd 4 9/10/08 11:10:46 AM 9/10/08 11:10:46 AM