JVC KW-AVX810 - Manual (Page 35)

OPERATIONS
35
ENGLISH
USB operations
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, portable HDD, etc. to
the unit.
• You can also connect the iPod to the USB terminal of the unit. For details of the operations, ☞ pages 50 to 52.
~
Connect a USB device.
The source changes to “USB” and playback starts.
This unit can play JPEG/MPEG1/MPEG2* 1 /MP3/WMA/
WAV/AAC* 2 files stored in USB mass storage class
device.
• You can operate the USB device in the same way you
operate the files on discs. (☞ pages 21 to 30)
• All tracks in the USB device will be played repeatedly
until you change the source.
• Make sure all important data has been backed up.
* 1 Except for MPEG2 files recorded by JVC Everio
camcorder (extension code <.mod>).
* 2 This unit can play back AAC files encoded using
iTunes. This unit cannot play back FairPlay-encrypted
files.
Caution:
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device
repeatedly while “Now Reading...” is flashing on
the monitor screen.
• Do not start the car engine if a USB device is
connected.
• Stop playback before disconnecting a USB device.
• Do not leave a USB device in the car, expose to
direct sunlight, or high temperature to avoid
deformation or cause damages to the device.
• For more details about USB operations, ☞ page
72.
Continued on the next page
USB cable from the rear of the unit
• You cannot connect a computer to the USB (
) terminal of the unit.
EN_KW-AVX810[E]f.indb 35 EN_KW-AVX810[E]f.indb 35 08.1.25 7:45:57 PM 08.1.25 7:45:57 PM