JVC KW-AVX810 - Manual (Page 63)

SETTINGS
63
ENGLISH
Menu items Selectable settings, [reference page]
Disc
Down Mix * 2 When playing back a multi-channel disc, this setting affects the signals
reproduced through the LINE OUT terminals.
Dolby Surr.: Select this to enjoy multi-channel surround audio by
connecting an amplifier compatible with Dolby Surround.
Stereo: Normally select this.
D. (Dynamic) Range
Compres. (Compression) *
2
You can enjoy a powerful sound at a low volume level while playing
Dolby Digital software.
Auto: Select to apply the effect to multi-channel encoded software.
On: Select to always use this function.
Tuner
IF Band Width Auto: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
Wide: Subject to the interference from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
AF Regional When the received signals from the current station become weak...
Off: Cancels—not selectable when <DAB AF> is set to <On>.
AF Reg. (Regional): Switches to another station broadcasting the same
programme. The REG indicator lights up.
AF: Switches to another station. The programme may differ from the one
currently received (the AF indicator lights up). ☞ [18]
TA Volume 00 to 30 or 50 * 3 ; Initial 15 ☞ [17]
Program Search Off, On ☞ [18]
DAB AF * 4 Off, On ☞ [49]
Input
AV Input * 5 You can determine the use of LINE IN and VIDEO IN terminals. ☞ [54]
Off: Select when no component is connected (“AV-IN” is skipped while
selecting the source).
iPod (Off): Select when connecting the iPod using the USB Audio and
Video cable for iPod. ☞ [50]
Audio&Video: Select when connecting an AV component such as a VCR.
Audio: Select when connecting an audio component such as a portable
audio player.
Navigation: Select when connecting a Navigation System.
* 2 Selectable only for “DISC”, “SD“, and “USB.“ (Playback stops when you change the setting.)
* 3 Depends on the amplifier gain control. (☞ page 65)
* 4 Appears only when DAB tuner is connected.
* 5 Not selectable when “AV-IN” is selected as the source.
The procedure for setting an item is shown on page 59.
EN_KW-AVX810[E]f.indb 63 EN_KW-AVX810[E]f.indb 63 08.1.25 7:46:09 PM 08.1.25 7:46:09 PM