JVC KW-AVX810 - Manual (Page 43)

Connected Device Name
EXTERNAL DEVICES
ENGLISH
43
* 1 Indicates the button pressed. It may be different from the operation status.
* 2 This button appears when the Bluetooth Adapter is connected.
* 3 You cannot select “NEW DEVICE” when a Bluetooth audio player is connected.
~
Press [SOURCE], then press [Bluetooth
AUDIO]. (☞ page 11)
• You can also use SOURCE on the monitor
panel. Press it repeatedly.
Ÿ
Start playback.
• See page 37 for connecting a new device.
• See page 38 for connecting/disconnecting a
registered device.
• See page 38 for deleting a registered device.
You can use the following buttons on the remote
controller for the Bluetooth audio operations.
Starts and pause playback.
Reverse/forward skip
Adjusts the volume.
Status of the device
Signal strength/Battery
remainder (only when
the information comes
from the device)
Sound mode
(☞ page 57)
* 1
The Bluetooth icon
lights up when the
adapter is connected.
Using the Bluetooth audio player
Bluetooth Information:
If you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.
jvc-victor.co.jp/english/car/>
[
3
/
8
] [
7
] Starts playback/pauses
[
4 ¢
] Reverse/forward search
[
5 ∞
] Selects the registered device
(“NEW DEVICE” appears when a new device can be registered.* 3 )
[ ] Displays <Dial Menu> screen
* 2
EN_KW-AVX810[E]f.indb 43 EN_KW-AVX810[E]f.indb 43 08.1.25 7:46:01 PM 08.1.25 7:46:01 PM