English, Input, Others – JVC KW-AVX810 User Manual

Page 64

Advertising
background image

64

ENGLISH

Menu items

Selectable settings, [reference page]

Input

Camera Input *

1

Off: Select when no rear view camera is connected to the CAMERA IN plug.
On: Select when connecting the rear view camera to the CAMERA IN plug.
The picture from the camera is displayed as it is taken.
• While the pictures through the camera are shown on the monitor, no

message will be displayed.

External Input *

2

For connecting an external component to the CD changer jack on the rear.
Changer/iPod *

3

: CD changer or iPod. ☞ [44, 53]

External: Any other than the above. ☞ [56]
• For connecting the Bluetooth adapter and DAB tuner, this setting is not

required. They are automatically detected.

Others

Beep

Off: Cancels.
On: Activates the key-touch tone.

Telephone Muting *

4

Off: Cancels.
Muting1, Muting2: Select either one which mutes the sounds while

using the car phone system.

Illumination

You can turn off the lights of the monitor panel buttons while turning on
the unit. ☞ [5]
Normal: Always lights.
Proximity/Motion: Lights up when your finger moves closer to the

touch panel.

Touch Panel: Lights up when your finger touches the touch panel.

Motion Sensitiv.

Change the sensitivity of the sensor for Illumination Off mode.
Low, Mid, High

Initialize

Initialize all settings you have made in <AV Menu>. Press and hold
[Enter] to initialize the settings, then reset the unit. ☞ [3]

*

1

The REVERSE GEAR SIGNAL lead connection is required. See Installation/Connection Manual. The rear view through

the camera appears on the screen in <Full> aspect ratio (regardless of the aspect ratio setting) when you shift the
gear to the reverse (R) position. When you press DISP on the monitor panel, or when you shift the gear to another
position other than the reverse (R) position, the rear view screen is cleared.

*

2

Not selectable when the component connected to the CD changer jack is selected as the source.

*

3

The name of the component detected through the CD changer jack is shown.

*

4

The TEL MUTING lead connection is required. See Installation/Connection Manual.

Initial:

Underlined

EN_KW-AVX810[E]f.indb 64

EN_KW-AVX810[E]f.indb 64

08.1.25 7:46:10 PM

08.1.25 7:46:10 PM

Advertising