Candy FLGR 201 X - Manual (Page 49)

Proceed as follows to turn on the oven burner:
• Press the thermostat knob slightly and turn it anticlockwise to 270°C.
• Press the knob down completely to trigger electrical switch on and keep it pressed
down for several seconds until the safety device comes on.
• Position the knob at the temperature required.
If the oven does not come on or is not equipped with a switching on device, proceed as
follows:
place a lighted match or gas lighter near the central slit in front of the oven plate,
simultaneously pressing down the thermostat knob completely and turning it anti-
clockwise to the temperature required (fig. 10).
Check the oven burner has turned on through the slits in front of the oven plate and
check that the flame continues to burn when the thermostat knob is released. If not,
repeat the operation.
Always check correct burner operation with the oven door closed.
Fig.10
47