Accu-Chek Active - Manual (Page 25)

23 Chapter 3: Testing Your Blood Sugar
ACCU-CHEK Customer Care Service Center 1-800-858-8072
4. Snap the cap back on after
lining up the notches. The
cap easily snaps into place.
Release Button
5. Twist the cap to set the lancet
depth. Start at 2 or 3. For tougher
skin, dial to a higher number.
6. Press the plunger (like a pen) until
it clicks. The release button turns
yellow when the device is ready.
Set aside until later in the test.
Notes:
• The best depth setting is the lowest number that lets you get enough blood
for a test. Try different settings to find the one that’s right for you.
• To maximize testing comfort, always use a new lancet for every test.
• To reduce the risk of infection, never share your lancet device with anyone.