Accusys ExaRAID A24U-SJ - Manual (Page 24)

JBOD System
Quick Start Guide
22
2.Plug the second power cable into the other AC power port.
3.Once all the components have been connected, the system can now
be powered on using the power switch.
Power on the system in the following order:
• JBOD system(s)
• RAID system
• Host server
Note
Before turning the system on, make sure the chassis ID switch has
been set properly.
When the JBOD system is successfully installed and powered on,
Power, Fan, TEMP, and HDD will turn green and IO1 and IO2 RDY
LEDs will flash green.