Accusys ExaRAID A24U-SJ - Manual (Page 30)

JBOD System
Quick Start Guide
28
For example, to add LUN of fcpa1 in the logical disk DG0LD0, type the
following in the command line:
CLI>htpaddlun fcpa1 dg0ld0
6.Check if all logical disks have LUN mapping, type htplistlun all in the
command lin
Parameters
[-i scsi_id]: SCSI ID
Refer to sgaddlun for other parameters.
Note
Make sure that all logical disk have LUN mapping.
Note
For more details on CLI configuration, please see Chapter 4 Using
the CLI Commands in the Accusys RAID GUI user’s manual.