Accusys ExaRAID A16U-IS - Manual (Page 18)

Accusys A16R/A16U-IS
16
3. Click disks from disk table and press DST button, the following screen
appears.
4. Click Perform extended disk self test and Confirm button to start verify
the status of disk, it will takes a period of time, depend on different disk
capacity.
5. Exchange the disk failed at DST test.
Enable Battery Backup Module
If BBM (Battery Backup Module) is installed, follow steps below to enable BBM
function.
1. Click Maintenance Utilities -> Disk Self Test from config menu. The
following screen appears.
2. Click ON and restart RAID system to enable BBM function.