Accusys ExaRAID A16U-IS - Manual (Page 6)

Accusys A16R/A16U-IS
4
Installing the Hard Disks
The RAID system supports SAS or SATA interface hard drives.
Follow the procedures below to install hard drives:
SAS hard disks
1. Insert the SAS hard drive into the hard disk tray. Screw the sides to
secure the hard disk. Repeat this procedure to install more hard disks.
2. Insert the key to the key slot and turn to unlock the front panel door.
Caution
It is recommended to mount the RAID system to the rack cabinet
first before installing the hard drives and the drive trays. If the hard
drives are installed first, the RAID system may be too heavy to lift or
handle. And the possible impact during installation may damage the
drives.
Power P/S Fail Ac cess
ESC Enter