Accusys ExaRAID A16U-IS - Manual (Page 22)

Accusys A16R/A16U-IS
20
5. Use the system default name as dgxldy. ‘x’ is the DG identifier and ‘y’ is
the LD identifier. OR Uncheck the ‘Use system default name’ box and
enter the name in the Name field.
6. Select a RAID level for the logical disk. Different logical disks in a disk
group can have different RAID levels. However, when NRAID is
selected, there must be no non-NRAID logical disks in the same disk
group.
7. Enter an appropriate capacity for the logical disk. This determines the
number of sectors a logical disk can provide for data storage.
8. Select the preferred controller to be in charge of managing and
accessing the logical disk.
9. Click Apply to start creating the logical disk.
10. Repeat step 2 to 9 to create more logical disks.
For example:
Note
In Logical Disks page support RAID Level 0,1,10,3,5,6 and NRAID
only. RAID Level 30/50/60 (striped RAID 3/5/6) must be configured
at Volumes page, please refer to the Software User Manual for
detailed procedures.