ACR&Artex 2-Wire ELT__RSWT Interface - Manual (Page 7)

ACR Electronics, Inc. 570-0049 Revision B
The information within this document and any attached materials is proprietary and confidential
and is not to be disseminated, distributed, or otherwise conveyed throughout your organization to
employees without a need for this information or to any third parties without the express written
permission of ACR Electronics, Inc.
Page 7 of 30
1. INTRODUCTION
This manual contains detailed information about the installation and operation of the interfaces
453-0032 and 453-0041 with any Artex Emergency Locator Transmitters. The interfaces do not
function with the ELT-200 series.
The intent of the interface system is to provide a cost effective means to our customers to retrofit
existing ELT installations using 2-wire connection between the ELT and a toggle switch.
This manual is not intended to be an installation for the ELT system. Use this manual in
conjunction with any Artex ELT manuals.
2. PARTS LIST
The following parts should be included with the 455-0032, 455-0041, and 455-0049 Pack Lists.
Please contact ACR Electronics, Inc. if shortages are found.
QUANTITY PART NUMBER DESCRIPTION
455-0032 Pack List, 2-Wire RSWT Interface 453-0032
1 ea. 150-0022 Connector, Plug D-Sub 9-Pin Crimp
1 ea. 151-0006 Backshell, D-Sub 9-Pin Plastic
11 ea. 151-0042 Pin, D-Sub 22-26 AWG Crimp
2 ea. 201-0810 Screw, PHP 8-32 x 5/8 SS
2 ea. 241-0832 Nut, Hex 8-32 x ¼ SS
2 ea. 246-0001 Washer, Flat #8 OD3/8 SS
2 ea. 247-0800 Washer, Lock Internal Tooth #8
1 ea. 453-0032 2-Wire Remote Switch Interface
QUANTITY PART NUMBER DESCRIPTION
455-0041 Pack List, 2-Wire ELT Interface 453-0041
1 ea. 150-0022 Connector, Plug D-Sub 9-Pin Crimp
1 ea. 151-0006 Backshell, D-Sub 9-Pin Plastic
11 ea. 151-0042 Pin, D-Sub 22-26 AWG Crimp
2 ea. 201-0810 Screw, PHP 8-32 x 5/8 SS
2 ea. 241-0832 Nut, Hex 8-32 x ¼ SS
2 ea. 246-0001 Washer, Flat #8 OD3/8 SS
2 ea. 247-0800 Washer, Lock Internal Tooth #8
1 ea. 453-0041 2-Wire ELT Interface