Acroprint Data Collection Terminal (ADCT) - Manual (Page 21)

21
Wand and Y-Cable
Disconnect power to the terminal before connecting the Bar Code
Wand. The wand is capable of reading bar code stripes by passing
it directly over the label. Check the software manual to identify
the codes your terminal will read.
The Y-cable shown below allows for connection of both a wand
and other external devices. The single end of the cable is plugged
into the terminal. A wand can be connected to one split and
another device to the other. See appendix for External Relay Box
part number.
Bar Code Wand
Y-cable (splitter)
Ports and connections