Acroprint Data Collection Terminal (ADCT) User Manual
Page 5
5
General specifications
A. Enclosure: 8.7 in. (23 cm) wide x 6.1 in. (16 cm) tall x 2.3
in. (6 cm) deep. Clamshell construction of 0.125 in. (3
mm) thick Polycarbonate/ABS injection molded flame
retardant plastic. Includes reversible mounting bracket and
access door which protects I/O ports.
B. Multilayer main logic board with internal ground and power
planes.
C. Z-180 Microprocessor.
D. Up to 512 Kbyte configurable memory. Most common
configuration is 64K ROM and 128K RAM.
E. Lithium battery backed RAM.
F. Real Time Clock Chip on-board.
G. Magnetic card reader: Track 2 ABA recording head for reading
standard Credit Card format through the slot.
H. Display: 2 lines with 20 characters on each line. ADCT is backlit.
I. Keypad: Full travel keys with elastomeric contact pad, 4 rows x
4 columns.
J. Serial Port: RS-232 using 6 position (4 contact) RJ-11 modular
connection.
K. Serial Port: RS-485 (Local Area Network) using RJ-11 modular
connection.
L. Parallel port: 25-pin DB connection.
M. Internal Modem: Bell 212A (1200bps) and 103 (300bps) ,
CCITT V.22 bis (2400 bps) and V.22 (1200 bps), asynchro-
nous, licensed for use over public telephone lines.
N. Internal Multi-Frequency Piezo Electric Buzzer.
O. Internal Bar Code Reader: Visible or Infrared Bar Code
reading through the slot.
P. Control lines: Two pins of the 6-pin circular DIN connector
can be used with external relay box to control devices such
as door locks and bells.
Q. External Bar Code port: 6-pin DIN connection for external
Bar Code Wand or Bar Code Gun.
R. Power: Wall mount transformer, 9 Volts AC/DC 800 mA
minimum or 10 Volts AC/DC 700 mA minimum, with
female secondary plug size 2.1 x 5.5 mm.
Introduction