Acroprint Data Collection Terminal (ADCT) User Manual
Page 7
Advertising
7
Mounting
Unscrew the access door. With the door off, the main unit can be
slid upward and removed from the mounting bracket. The bracket
can be used for wall mounting, or it can be reversed to tilt the unit
on a desktop.
Power up
Plug in the power cord coming from the wall mount transformer into
the terminal. Reattach the access door and secure the unit to the
reversible bracket. Replace screw on the access door.
NOTE: Other connections are made in the same fashion. Notice
the channels in the bracket available for cable routing. Also, the
bracket has through-holes for further securing of cables using
ties.
Setup
Advertising