Activeforever Phoenix Model 1850 Knee CPM - Manual (Page 7)

PATIENT SET UP
BED STABILIZING SYSTEM
Bed stabilizer rods are included in the base of each Furniss Knee CPM. This system, in conjunction with the non-skid pad
located on the bottom of the control box, effectively prevents migration or "movement" of the unit while on a patient.
 Loosen the base knobs, extend the rods to the appropriate length and tighten the knobs securely.
 Stabilize the rods against a solid barrier such as a foot board.
PEDIATRIC AND PETITE PATIENT ADJUSTMENT
The Furniss Knee CPM can adjust easily to accommodate pediatric and petite patients.
 Loosen the calf adjustment knobs and slide the foot assembly out of the cradle.
 Loosen the foot assembly adjustment knobs (do not remove).
 Rotate both foot tubes 180 degrees so that they are facing the opposite direction.
 Tighten the foot assembly adjustment knobs.
 Slide cradle back into the device and secure with
the calf adjustment knobs.
 Note: You may apply a strip of adhesive-backed
loop Velcro to this side of the footplate for added
stability of the foot boot softgood.
Bed stabilizer rods (2)
Base knobs (2)
www.ActiveForever.com