Digital control pendant overview – Activeforever Phoenix Model 1850 Knee CPM User Manual
Page 9
DIGITAL CONTROL PENDANT OVERVIEW
*
Pause option:
Phoenix Models are set to pause at the end of flexion
and extension cycles. This setting can be changed to
pause the CPM device in extension only.
Range of Motion (ROM) window
Extension window
Extension button
Flexion window
Flexion button
*Pause button
Speed button
Patient must have access to the
hand-held control pendant at all times.
The Stop/Start button allows patient to
stop the unit as needed. As a safety
feature, the unit will travel in the opposite
direction when the button is depressed
again.
Patient Lock-Out function:
The lock-out switch is located on the back of the
control pendant under the plastic door cover.
To prevent inadvertent changes to pendant settings, simply slide
the switch to the locked position. The ROM window will read
'LOC' should attempt be made to adjust settings when this is in
place. The stop/start button functionality remains the same.