Transferring to and from other seats, Unfolding and folding wheelchair – Activeforever Invacare Tracer IV Wheelchair User Manual

Page 18

Advertising
background image

SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS

Tracer

®

IV

18

Part No. 1110558

Transferring To and From Other Seats

ƽ WARNING

Before attempting to transfer in or out of the wheelchair, every precaution should

be taken to reduce the gap distance. Turn both casters parallel to the object you are

transferring onto. Also be certain the wheel locks are engaged to help prevent the

wheels from moving.
Wheelchairs with adjustable height armrests only: Adjust armrests to lowest posi-

tion prior to transferring into or out of wheelchair - otherwise injury or damage

may occur.

CAUTION

When transferring, position yourself as far back as possible in the seat. This will help

prevent damaged upholstery and the possibility of the wheelchair tipping forward.

NOTE: For this procedure, refer to FIGURE 2.6.

NOTE: This activity may be performed independently provided you have adequate mobility and
upper body strength.

Position the wheelchair as close as possible
alongside the seat to which you are
transferring, with the front casters
pointing parallel to it. Remove or flip up
the armrest. Engage wheel locks. Swing
away or remove front rigging. Shift body
weight into seat with transfer.

During independent transfer, little or no
seat platform will be beneath you. Use a
transfer board if at all possible.

FIGURE 2.6 Transferring To and From

Other Seats

Unfolding and Folding Wheelchair

ƽ WARNING

ALWAYS keep hands and fingers clear of moving parts to avoid injury.
DO NOT place hand or fingers on the underside of the seat frame rail when opening

or closing the wheelchair.
DO NOT sit or transfer into the wheelchair unless it is fully open and the seat frame

rails are fully seated into the side frame H-blocks.
Invacare recommends that a non-folding device be installed to keep the wheelchair

from being folded when left unoccupied in a public place.

Advertising