Removing armrest, Installing armrest – Activeforever Invacare Tracer IV Wheelchair User Manual

Page 33

Advertising
background image

SECTION 5—ARMS

Part No. 1110558

33

Tracer

®

IV

Removing Armrest

1. Push down on armrest to ensure it is fully seated in front and rear sockets.

NOTE: STEP 1 prevents the release buttons from hanging up on the sockets during removal.

2. Unlock the rear armrest by rotating the armrest release lever towards the inside of the

wheelchair.

3. Press in the armrest release button at the front of the armrest.

4. While pressing in the armrest release button, remove the armrest from the arm sockets

by pulling straight up.

Installing Armrest

NOTE: Rear armrest release lever MUST be in
the unlocked position when installing the
armrest.

1. Position the armrest just above the

front and rear arm sockets.

2. Push arm down evenly at the front and

rear until the front armrest release
button snaps into the front arm socket.

3. Lock rear armrest by turning the

armrest release lever towards the
outside of the wheelchair.

4. Ensure armrest is locked securely in the

arm sockets by gently lifting up. If not
locked, repeat STEPS 1-3.

FIGURE 5.2 Removing/Installing Armrests

Armrest

Release

Button

Armrest

Release

Handle

Armrest

Rear
Arm

Socket

Front Arm

Socket

Advertising