Replacing back upholstery, Replacing seat upholstery – Activeforever Invacare Tracer IV Wheelchair User Manual

Page 34

Advertising
background image

SECTION 6—SEAT AND BACK

Tracer

®

IV

34

Part No. 1110558

SECTION 6—SEAT AND BACK

ƽ WARNING

After any adjustments, repair or service and before use, make sure all attaching

hardware is tightened securely. Otherwise injury or damage may occur.

Replacing Back Upholstery

NOTE: For this procedure, refer to FIGURE 6.1.

1. Remove the eight mounting screws and

washers that secure the existing back
upholstery to the back canes.

2. Remove existing back upholstery from

the back canes.

3. Securely tighten the new back

upholstery to the back canes with the
mounting screws and washers.

FIGURE 6.1 Replacing Back Upholstery

Replacing Seat Upholstery

NOTE: For this procedure, refer to FIGURE 6.2.

1. Perform one of the following:

• 18-Inch Deep Seats: Remove the ten mounting screws and washers that secure the

existing seat upholstery to the crossbraces.

• 20-Inch Deep Seats: Remove the twelve mounting screws and washers that secure

the existing seat upholstery to the crossbraces.

2. Remove the existing seat upholstery

from the crossbraces.

3. Ensure positioning of seat positioning

strap (if used). Refer to Installing the
Seat Positioning Strap on page 51.

4. Install new seat upholstery by

reversing STEPS 1-2.

FIGURE 6.2 Replacing Seat Upholstery

Washers

Back Upholstery

Washers

Mounting

Screws

Mounting Screws

Wheelchair

Frame

Seat

Upholstery

16-inch

Seat Depth

Advertising