Activeforever Respironics EverGo Portable Oxygen Concentrator User Manual
Page 17
14
EverGo User Manual
Figure 9. Touch the number to change the
flow setting.
4. To set the device’s flow setting,
first touch the large number (such
as the 2 shown in Figure 9) in the
center of the screen.
5. Each time you press the flow
setting number, an up arrow
and/or down arrow
will appear on the screen.
(Examples are shown in Figures 16-17). To increase the flow
setting, press the up arrow. To decrease the flow setting, press the
down arrow.
The device can be set to: 1, 1½, 2, 2½, 3, 3½, 4, 4½, 5, 5½, and 6.
Warning: It is very important to set your device to your prescribed level
of oxygen flow. Do not increase or decrease your flow rate from your
prescribed level until you first consult with your physician.
Note: When it is turned on, the device will automatically start at the flow
rate setting used when the device was last turned off. As a precaution, each
time you start the unit, verify the flow setting.
6. Position the nasal cannula on your face, as shown below, and
breathe normally through your nose.
Figure 10. Correct position of cannula on your face.