2013 tl, Entering a destination – Acura 2013 TL Navigation User Manual

Page 49

Advertising
background image

Entering a Destination

Navigation System

49

Show Map of State

By Voice Control:
Say “State” on the

Show map of

screen, and the display changes to the

Select a state

screen. Say the state

name (e.g., California or CA) or the
state number (1-7).

You can select either the

Canada/AK

,

USA, or Mexico

tab by moving the

Interface Dial

to the left and right.

If you select

Canada/AK

, Canada and

Alaska will be displayed. If you choose

USA

, the American mainland, Hawaii,

and Puerto Rico will be displayed. If
you select

Mexico

, the states of Mexico

will be displayed.

Say the state name by saying individual
letters, or words that represent the
letters, one at a time.

By Interface Dial:
With the

State

selection, the display

changes to the

Select a state

screen.

After you select the desired state, the
display changes to a map of the state,
with the crosshairs located near the
middle.

The yellow box indicates the area you
will see when you click on the current
map with the

Interface Dial

. The

scale will decrease each time you push
in on the

Interface Dial

.

Use the

Interface Dial

to move the

crosshairs to the area of the state close
to your intended destination. If desired,
rotate the

Interface Dial knob

to

change the map scale. When you have

the crosshairs in the desired area, push
in on the

Interface Dial

. The address

of the location you have selected will
appear at the top of the screen.

NOTE:
Information icons are displayed at
scales from 1 mile to 1/4 mile, POI
icons are displayed at 1/8 mile or less,
and roads are displayed at 1/4 mile or
less.

If this is the desired address, push in
on the

Interface Dial

again. If not,

use the

Interface Dial

to reposition

the crosshairs, then push in on the

Interface Dial

again to display the

new address.

If you selected a single icon or road
segment, select

Set as Dest

. to

calculate a route to the selected
destination. If you selected multiple icons
within the cursor radius, select an item
from the list. Then select

OK

to calculate

a route to the selected destination.

2013 TL

Advertising
This manual is related to the following products: