Acura 2013 TL Navigation - Manual (Page 76)

Driving to Your Destination
76 Navigation System
When you say or select Avoid , the
display returns to the list screen. When
you move the
Interface Dial down
on the list screen to select Reroute ,
the system recalculates a detour route
avoiding the road.
You can choose to avoid up to 10 traffi c
incidents.
NOTE:
• When you select the “All” tab,
Avoid
is not displayed.
• To activate this function, you need to
set Traffi c Rerouting to ON in the
Routing & Guidance settings (see
page 110 ).
• Because the criterion for whether
the traffi c event is to be detoured or
not is included in the traffi c event
data itself, the traffi c rerouting is not
performed for all the traffi c incidents
ahead on the route.
• Even when the route recalculation is
performed for a traffi c event, if the
system cannot fi nd any detour route
or a quicker detour route, the event
location is not always avoided.
• Traffi c rerouting is available only if
you have a current traffi c/weather
subscription with XM. See page
124 .
Changing the Route
While en route, you may wish to alter
your route, add an interim “Waypoint”
(pit stop), choose a different destination,
or cancel your current destination. To
change your present route, you can do
any of the following:
Say “Menu,” or press the DEST/
ROUTE button to view the DEST
screen ( Route ):
• Cancel Route (page 77 )
• Detour (page 77 )
• Avoid Streets (page 77 )
• Change Route Preference (page 77 )
• Waypoint (page 77 )
• Destination Lists (page 78 )
Choose a different destination (other
methods) by:
• Saying, “Find nearest...” to fi nd a POI
(page 79 ).
• Saying, “Go home” (page 79 ).
• Using the Interface Dial to select a
different POI or address on the map
(page
80 ).
• Pressing the DEST/ROUTE button
and selecting the “Dest. MENU 1 or
2” tab on the
DEST screen (page 81 ).
DEST Screen (Route)
Pressing the DEST/ROUTE button
displays the DEST screen ( Route ):
NOTE:
The “Route” tab can be selected only
when you are en route.
2013 TL