Olympus IX71 User Manual
Page 3
IX71/IX51
CONTENTS
5
6-11
12, 13
14-31
IMPORTANT
— Be sure to read this section for safe use of the equipment. —
1 MODULE NOMENCLATURE
2 CONTROLS
3
4 USING THE CONTROLS
TRANSMITTED LIGHT BRIGHTFIELD OBSERVATION PROCEDURE
4-1 Power Supply Unit and Microscope Frame ......................................................................................... 14-16
4-2 Focusing Block ............................................................................................................................................................................. 16, 17
1
Turning Power On, Adjusting the Brightness
2
Light Path Selection
3
Magnification Change (IX71 Only)
4
Frame Clamping Plate
5
Option Button (IX71 Only)
4-3 Stage ........................................................................................................................................................................................................... 18, 19
4-4 Observation Tube .................................................................................................................................................................... 20-22
4-5 Illumination Column IX2-ILL100 ........................................................................................................................... 22-24
1
Tilting the Illumination Column
2
Mounting the Filters
3
Using the Field Iris Diaphragm
4
Adjusting the Condenser Height Adjustment Knob Tension
1
Adjusting the Interpupillary Distance
2
Adjusting the Diopter
3
Using the Eye Shades
4
Using Eyepiece Micrometer Disks
5
Selecting the Light Path of Observation Tube (U-TR30H-2 Only)
6
Using the CT Turret (U-BI90CT Only)
7
Adjusting the Tilt (U-TBI90 Only)
1
Rotation Direction of the Coarse/Fine Adjustment Knobs
2
Adjusting the Coarse Adjustment Knob Tension
3
Detaching the Fine Adjustment Knob
4
Pre-focusing Lever
1-4
1
Placing the Specimen
2
Moving the Specimen
3
Connecting the Grounding Wire
4
Adjusting the X-Axis/Y-Axis Knob Rotation Tension
4-7 Condenser .......................................................................................................................................................................................... 27-29
1
Centering the Condenser
2
Using the Aperture Iris Diaphragm
3
Flipping Up the Condenser Holder
4-8 Objectives .......................................................................................................................................................................................... 30, 31
1
Oil-Proof Cap (UIS Series only)
2
Adjusting the Correction Collar
3
Using Immersion Objectives
Correct assembly and adjustments are critical for the microscope to exhibit its full performance. If you are going to
assemble the microscope yourself, please read Chapter 9, “ASSEMBLY” (pages 55 to 65) carefully. For the modules
provided with instruction manuals, also read the assembly procedures in their instruction manuals.
4-6 Illumination Column IX2-ILL30 ............................................................................................................................. 25, 26
1
Using the Aperture Iris Diaphragm
2
Removing the Condenser Lens
3
Mounting the Filters
4
Using the Filters
5
Mounting the Manipulator