Olympus IX71 - Manual (Page 30)

26
3 Mounting the Filters (Figs. 38 & 39)
}Wait until the filters have cooled down enough before replacing a filter.
Take out the filter holder @ and insert the required filter ².
# Insert the filter so that it comes at the bottom without tilting, as shown
in Fig. 39. If the filter is titled or not inserted to the bottom, it may drop
from the filter holder.
}More than one filter can be stacked in the filter holder, provided that the
total thickness of filters does not exceed 11 mm.
}Using appropriate filters according to the purposes allows you to observe
and photograph specimens more effectively. Particularly, the use of the 45LBD
filter is recommended in observation and photomicrography because it
renders more neutral colors.
}More than one filter with a diameter of 45 mm can be stacked in the filter
holder @.
Fig. 38
@
²
Fig. 39
4 Using the Filters (Fig. 38)
Filter Application
43IF550-W45 Monochrome contrast filter (Green)
45ND6, 45ND25
Light intensity adjustment filter
(Transmittance 6% and 25%)
45LBD
Color temperature conversion filter
(For observation and photomicrography)