Garmin GPS III - Manual (Page 30)

To mark your present position:
1. Press and hold the ENTER/MARK key. The Mark Waypoint Page will appear, with a
default three-digit name for the new waypoint in the upper-left portion of the page.
Let’s call our present position ‘HOME’. (If you were at home when you initial-
ized your GPS III, you might want to keep this waypoint in memory for future use!)
To rename the waypoint and change its symbol:
1. Use the keypad to highlight the name field, and press ENTER.
2. Enter the new waypoint name (‘HOME’) using the rocker keypad, and press ENTER.
(Remember to use UP/DOWN to change the character and RIGHT to move to the next
character field.)
3. Highlight the waypoint symbol field and press ENTER.
4. Select the ‘Residence’ symbol, and press ENTER.
5. Move the cursor to the ‘DONE?’ prompt, and press ENTER.
Now we have two waypoints in memory and on the map: ‘SIMUL8’ and ‘HOME’.
It’s about time we get started, so let’s plug a speed into this simulator to animate the
displays!
To enter a simulated speed and animate the displays:
1. Press PAGE repeatedly until the Compass Page appears.
2. Enter a simulated speed of ‘10’ (mph or knots) using the rocker keypad. (Press UP on
the rocker keypad once to select ‘10’. The speed readout is on the upper right corner
of the Compass Page.)
3. Press PAGE (or QUIT) repeatedly to return to the Map Page.
To mark your present position
and save it as a waypoint,
press and hold ENTER. A
three-digit name is automati-
cally assigned to the waypoint.
From the Compass Page you
can increase/decrease the
simulated speed using the
UP/DOWN keys on the
rocker keypad.
22
SIMULATOR TOUR
Marking Present Position
GPS III A 7/21/98 8:51 AM Page 22