Garmin GPS III - Manual (Page 84)

The GPS III can be mounted on the dashboard of an automobile or to another
convenient surface using the two Velcro™ strips provided with the unit.
To mount the GPS III using the Velcro strips:
1. Select a location for the unit that pro-
vides a clear and unobstructed view of
the sky.
2. Remove the paper strip liners from both
pieces of Velcro.
3. Make sure the surface to which you’re
adhering the Velcro is clean and dry.
Place the adhesive side of the rough
piece of Velcro on the desired mounting
surface, and press into place.
4. Place the adhesive side of the smooth
piece of Velcro on the bottom of the unit (between the rubber anti-skid bumps), and press into place.
5. Mount the unit, placing one piece of Velcro on top of the other.
Optional Dash Mounting Bracket
An optional dash mount bracket is also available for your GPS III. This
bracket allows you to adjust the GPS III for best viewing angle, while installed
on the dash of a vehicle. The dash mount bracket may be permanently
installed or temporarily mounted using supplied Velcro fasteners.
76
APPENDIX A
Dashboard Mounting
GPS III A 7/21/98 8:52 AM Page 76