Garmin GPS III - Manual (Page 68)

Delete All— allows you to remove all routes from memory. The waypoints con-
tained in all stored routes will remain in memory, but not as part of any route.
To delete all routes from memory:
1. Highlight ‘Delete All’ and press ENTER. A confirmation page will appear.
2. Press ENTER to delete all routes (or QUIT to cancel).
Active Route Page
The last page appearing in the main sequence (using the PAGE or QUIT keys) is
the Active Route Page. Whenever you have activated a route, GOTO, MOB or
TracBack, the Active Route Page will show each waypoint (by name) of the active
route, along with the desired course, distance to waypoint, time to each waypoint,
fuel requirements or sunrise/sunset times at each route waypoint. As you navigate the
route, the information on the Active Route Page will automatically update to indicate
the destination waypoint and any remaining interim waypoints—with the next point
along the route denoted by an arrow on the left-hand side of the screen.
From the Active Route Page you can change the name of the active route (see
page 56), review information on a route waypoint (see page 45) or bypass route way-
points and GOTO any waypoint in the route (see page 50). The user-selectable data
field on the right side of the page also keeps you informed of current conditions.
There are ten different data items available. See page 85 for data type descriptions.
To change the Active Route Page data, press the LEFT/RIGHT keys on
the rocker keypad.
The Active Route Page shows
the route currently being used
for navigation guidance. The
next waypoint in the route is
denoted by an arrow on the
left-hand side of the screen.
Selecting a GOTO destination
along the current route will
take you directly to that way-
point, then continue with the
remainder of the route.
60
REFERENCE
Route Options / Active Route
GPS III A 7/21/98 8:52 AM Page 60