Garmin GPS III - Manual (Page 59)

Cancel GOTO— cancels the current GOTO destination and resumes navigation
of any previously selected route. If no route is currently in use; bearing, distance,
etc. will remain blank until a destination waypoint is defined.
To cancel the current GOTO destination, highlight ‘Cancel GOTO’ and
press ENTER.
MOB (man overboard)
The GPS III’s MOB function lets you simultaneously mark and set a course to a
position for quick response in an emergency. Once an MOB has been activated, an
MOB symbol will appear on the map display and the navigation screens will guide you
back to the ‘MOB’ waypoint.
To activate the MOB function:
1. Press and hold GOTO to capture the MOB position.
2. Press ENTER to begin navigating back to the ‘MOB’ waypoint.
3. To cancel the MOB function, select ‘Cancel GOTO’ from the GOTO Options and
press ENTER.
NOTE: Each time an MOB is activated, any previous ‘MOB’ position stored in
memory will the overwritten and permanently lost. If you wish to save an ‘MOB’
waypoint for future use, you should give the waypoint a new name using the steps
outlined on pages 45-46.
To cancel a current GOTO
destination, select ‘Cancel
GOTO’ from the GOTO
Options.
Press and hold the GOTO key
to activate the MOB (man
overboard) feature.
51
REFERENCE
GOTO Options / MOB
?
GPS III A 7/21/98 8:52 AM Page 51