Garmin GPS 150XL - Manual (Page 23)

To change any of the selectable fields on the NAV summary page:
1. Press
C
to activate the cursor.
2. Rotate O to highlight the field you would like to change.
3. Rotate
K
to change the field to display the desired information.
4. Rotate
O
to highlight another field, or
C
to finish.
The next page available from the GPS 150XL’s N key is the map page. The map
page displays your present position, using an airplane symbol (in track up mode) or a
position diamond (in other orientation modes), along with nearby airports, VORs,
NDBs, intersections, user waypoints and airspace boundaries. Note: If the GPS 150XL is
unable to determine a GPS position the present position symbol will not appear on the
map page.
The map display occupies the right side of the display and shows your position rel-
ative to nearby airports, navaids, user waypoints and airspaces. Different symbols are
used to distinguish between waypoint types. The identifiers for any on-screen way-
points can also be displayed. Special-use and controlled airspace boundaries appear on
the map, showing the individual sectors in the case of Class B or Class C airspace. The
map display can be configured to display airports, navaids, user waypoints, airspaces
only at certain scales or these items may be disabled entirely (see page 70). This allows
you to de-clutter the map display at larger scale settings.
13
SECTION
1
NAV KEY
NAV Summary
& Map Pages
Data
Fields
Present
Position
{
Map Display
Map Scale
The map page, showing airports, airspaces, VORs
and NDBs on the map display.
The map page, showing only airports and air-
spaces on the map display.
150xl manual B 8/4/98 1:09 PM Page 13