Garmin GPS 150XL - Manual (Page 92)

Data transfer page
APPENDIX
A
NAVDATA CARD
Saving User Data
Restore data page
To restore user data from a user data card to the GPS 150XL:
1. Install the user data card.
2. Rotate O to highlight ‘Restore user data?’.
3. Press E .
The GPS 150XL will ask you which type of data to replace. You may choose check-
lists, scheduler messages, user waypoints, proximity waypoints, routes, waypoint com-
ments, or all data.
4. Rotate
K
to select the type of data to replace.
You may either replace or update the information in the database. Replacing the
data will replace ALL user data with the data from the card. Updating the data will
not delete unrelated material, but will only change what is necessary to use the data
received from the user data card.
5. Rotate O to select either ‘Replace?’ or ‘Update?’.
6. Press
E
to begin transferring data to the GPS 150XL. The GPS 150XL will now transfer
all of the data requested. This may take a few minutes.
7. To continue with more data transfer types, repeat steps 4, 5 and 6. Otherwise, press E
when ‘ok?’ is highlighted.
8. Turn the GPS 150XL off and replace the user data card with a NavData card. The GPS
150XL is now ready for normal operation.
82
150xl manual B 8/4/98 1:10 PM Page 82